Adjusting Audio Settings - PULSE SUB+

Updated

You can modify the audio output of Bluesound PULSE SUB+ by adjusting the audio settings of the paired player.

For more information on pairing PULSE SUB+ to a Bluesound Player, refer to our Help Center article.

Note: Upgrade the BluOS firmware of PULSE SUB+ to get the latest Audio Settings menu options available for your Player.

Configure PULSE SUB+ Audio Settings 

To adjust the audio output of PULSE SUB+, perform the following steps:

Android/iOS - Configure PULSE SUB+ Audio Settings

  1. In the BluOS Controller App, select the Players tab Playerstab_icon.png. The list of players connected to the BluOS Controller App is displayed.
  2. Select the PULSE SUB+ paired player’s context menu (3 dots) and tap Audio Settings.
  3. Tap Subwoofer. The paired subwoofer menu options are displayed.

Windows/macOS - Configure PULSE SUB+ Audio Settings

  1. In the BluOS Controller App, select the Player Drawer.
  2. Select the PULSE SUB+ paired player’s context menu (3 dots) and select Audio Settings.
  3. Select Subwoofer. The paired subwoofer menu options are displayed.

PULSE SUB+ Audio Settings Menu

Subwoofer

mceclip1.png

Disabled – Disable to transmit all sound signals through the main player’s analog outputs only.

Enabled – Enable to apply a crossover at 80Hz (default) to transmit sound above 80Hz through the left and right analog outputs, and sound below 80Hz through PULSE SUB+.

Crossover

mceclip2.png

Adjust the subwoofer crossover point. The default crossover is 80Hz. (This option is not displayed when the subwoofer is disabled)

Subwoofer Trim

mceclip3.png

Adjust the audio output of PULSE SUB+ relative to the main volume of the paired Bluesound Player. (This option is not displayed when the subwoofer is disabled)

Phase

mceclip4.png

Set the Phase to 0° or 180° to synchronize the sine wave of audio if the audio output of PULSE SUB+ is lagging or ahead of the paired Bluesound Player.

WiFi

mceclip11.png

(Not an Audio Setting) Modify the wireless credentials of PULSE SUB+. For more information, refer to Connecting your PULSE SUB+ Wirelessly.

Name

mceclip8.png
(Not an Audio Setting) Text field to change the network name of PULSE SUB+ displayed in the Player Drawer.

Indicator Brightness

mceclip9.png

(Not an Audio Setting) Adjust the brightness of the status indicator LED band displayed on the side of PULSE SUB+.

Amplifier Standby

mceclip10.png

(Not an Audio Setting) Enable to reduce reduces power consumption of PULSE SUB+ to less than 3W when idle for more than 15 minutes. Expect an approximate 2-second delay in the audio output when resuming from standby at the next use.

Unpair

mceclip12.png

Select to unpair PULSE SUB+ from the current player. After unpairing, PULSE SUB+ appears in the Player Drawer under My Subwoofers. Press the Subwoofer link button mceclip13.png again to pair with another player.

 

Related articles