Node 2021 LED Light switch on randomly
Answered
Hi All,
I've already returned one unit with this problem and I now have a similar issue on my replacement. (Support concurred that there seemed to be an issue)
The top panel LED randomly switches on despite me not activating the proximity sensor. Has anyone else experienced this issue? Although not as bad as the first unit, I'm perplexed.
Unit works without issue otherwise and Bluesound support has been excellent. I was just wondering in case I was missing something. (Tried all the resets etc for problem shooting).
-
Official comment
Our QA and Engineering team is investigating an issue with the front LED pulsing on the NODE N130 in conjunction with the proximity sensor periodically being triggered by a false positive randomly turning it on such as light from a window or a plant in proximity then turning off at a regular interval - we hope to resolve this in software in a very near-future release.
-
Hi, I have a similar problem with my N130. My blue light led on top and in front are always on (set to dimed or normal positions no difference) but top touch panel with presets buttons and volume control arrows turns on and off randomly, every 5-10 sec panel lights up, for 5 sec and then again, at that time the top and front led illuminate without interruption. If I set blue led light to off, then top panel led, front led and touch panel switching on and off all together.
2 -
Hi to all, I have spent a lot of time, asking them to refund my node and they refused. The logic was since a lot of them were/are defective, even if they would replace it, most probably I would get a faulty one. Of course, they denied it.
Lesson learned. Unfortunately, the only solution is to buy all electronics (the ones you can find) from amazon. Return it back no questions asked. Leave a negative rating.
My experience with bluesound is one of the worst I have ever had. I cannot do anything about that, my bad that I spend my money on them.
2 -
My experience is that support has been really good. My device works and has been superb, I think with any new device there are going to be bugs.
I agree its really annoying and more should have been done in QA testing, but I trust in the assurances given that these problems are firmware and not defective units. Firmware at some point to be rolled out.
1 -
Today (August 21, 2021) I purchased a Bluesound Node from a local dealer. I have this same issue ... the use of 'proximity' is switched to 'on' in the settings, but the display never switches off, the light stays on for ever.
In view of an upcoming firmware fix for this I'll not return the unit yet because to me this is not a critical issue and chances are the replacement will show similar behavior.
1 -
Quote :- Tony W. - Product Support Manager
Our QA and Engineering team is investigating an issue with the front LED pulsing on the NODE N130 in conjunction with the proximity sensor periodically being triggered by a false positive randomly turning it on such as light from a window or a plant in proximity then turning off at a regular interval - we hope to resolve this in software in a very near-future release.
This was 2 months ago, any news ?
1 -
... they keep selling the faulty device.
1 -
I've applied 3.16.1 update this evening and can confirm it has fixed the problem as Martin previously suggested. No annoying flashing lights - at least for a week until the wife puts up the Christmas tree.
1 -
Many thanks Tony,
Can it be the case that this week´s firmware update 3.16.1 already solves the issue. For me it seems to work fine after the update.
1 -
Hi Tony,
I can confirm. Many thanks to all who were supporting the bug fix!
1 -
Hi Nate - I have escalated your issue to our Support Crew for more 1:1 details about your proximity sensor
1 -
Hi all. There was the same problem, the device is only 7 months old. LED panel flashing for no reason
1 -
Please check to make sure you have updated to the latest firmware 3.14.26 If you are still having issues from the Bluesound App Help…Send support request so Bluesound can look further into this for you.
0 -
Yes I have the correct firmware. Support has now confirmed its a bug that needs a firmware update
0 -
Curious, my top panel os always on, the front led switch randomly OFF.
How this can be a software problem as I'm running the same firmware.
0 -
It is a defective device! How is it possible to have sold so many defective devices, it goes beyond me.
Worst part though is their customer service.
0 -
Andrea Crema
sorry, cant follow you. You get a second unit and in your post you claim that the unit with the firmware 3.14.26 has the same faults as the first one.
Now suddenly you say that "my device works and has been superb" but "I think with any new device there are going to be bugs" ???
Those are some new alternative facts or it is something else, kinda UAP report?
0 -
No, they are defective devices and if judge by the comments on the forum there are a lot of them. In my case they have admitted it themselves. And know they ask me to return the device and pay shipping costs of around 40 euros for a new device, and two weeks without a streamer.
At the beginning I thought that indeed they were very customer oriented, but it seems that commercially they are still in the stone ages.
0 -
George Chatzidakis your contract is with the dealer you purchased from, it’s not Bluesound’s fault you bought it in another country from where you are living.
0 -
Hahah it is funny are you speaking on behalf of bluesound and you say to a client that you send a defective device, that it is his fault!! You are even worst than I think!
Or you are right I should ask apologies from you for buying your product! It is a joke!
0 -
Seppi,
I don't know where you and George are at home as with the warranties the things are not so direct. In case of EU, still not completely regulated, the path is to keep the warranties panEuropean. So if you buy an iPhone or a car in EU country A you can request a warranty repair in EU country B.
The problem is, that some manufacturers are contracting distributors with off guarantee contract, meaning that the manufacturer doesn't keep any kind of warranty so the distributor get lower purchase prices. The result is that the customers are the victims of such contracts.
0 -
May I know what is your position here Seppy?
Are you a Bluesound employee and their official representative or staff of a ticketing company or just writing here?
0 -
I am a customer, I do not work for Bluesound.
0 -
you were NOT the one that closed the post
0 -
Zero ID
My first and second units although exhibiting the same issue did function and allowed me to stream music, hence my comment saying I was pleased with the product.
The random switching on of the LED panel is an inconvenience and not great. The first unit was returned because neither I or Bluesound knew what the issue was. The second unit with the same problem - recreated back at Bluesound and confirmed as a firmware issue.
0 -
Hi Andrea
did they mentioned an ETD for the new firmware? As my Node is also foreseen for return I would perhaps try the new firmware. But except the front led erratic behavior and always on "feature" there is also the issue with the top panel always on and the proximity sensor is not working at all.
0 -
Hey Zero ID,
Ive had confirmation that both issues are due to be fixed by firmware.
1) The random switching on of the LED panel
2) The always on LED when turning off the proximity sensor
no ETA unfortunately.
0 -
Thank you all for your patience and understanding on this open consumer-based forum monitored by Bluesound. Some of the above comments will be removed as they do not focus on the subject matter.
1) Your Bluesound warranty is in fact a Distribution Based Warranty by trusted channels with years of experience to better understand the ever-evolving EU marketplace. Your Bluesound Dealer, if cross-border, is aware of this and will be happy to assist. If you have questions or concerns about the terms or policies of this private yet open forum - please e-mail support@bluesound.com with the subject ATTN TONY - Forum Terms to send me your concerns.
2) Our QA and Engineering team is investigating an issue with the front LED pulsing on the NODE N130 in conjunction with the proximity sensor periodically being triggered by a false positive randomly turning it on such as light from a window or a plant in proximity then turning off at a regular interval - we hope to resolve this in software in a very near-future release.
Thank you for your patience and understanding.0 -
Perfect thanks for the reply. I guess you feel satisfied with how you resolved the issue. To focus now on the subject matter, I found the perfect solution for the led problem!! To hide the device, of course, someone would say that I am going to lose some of the functionalities since it will be out of reach, but the LED problem would be solved. So if anyone comes with this problem to you, tell them to hide the device.
I regret so much for having given you my money, at least I would do in local level and through all the local forums and local price aggregators whatever I can so nobody else would have a similar experience.
0 -
@Tony W. Any updates regarding the LED/proximity issue?
0
Please sign in to leave a comment.
Comments
91 comments