One Channel cuts out from system connected to Powernode
-
Official comment
In the BluOS App Please select Settings, Send Support Request so the Bluesound Support Crew can review the log file and take a closer look.
-
You will have to detail further especially about the “system connected to POWERNODE”
0 -
Hi Seppi apologies it posted before I had a chance to finish typing - it is connected to a funktion-one system through the audio out, reversing the lead just makes the issue happen in the alternate speaker - I have also tried a different lead. If I turn the system off and on it fixes the issue but usually temporarily. There are 3 other independent bluesound speakers I’m using and running on a 2.4ghz network ,router is 3-meters from the node.
0 -
The diagnostics usually show up between Fair & good. Currently -60db signal strength.
0 -
Sorry I am puzzled as the POWERNODE only has speaker level outputs, can you clarify please.
0 -
Sorry I think it’s just the Node - confusing as it doesn’t actually say on the device.
0 -
Swap the channels, if you have a NODE I am guessing you are using the analogue line outs so simple to swap over at the back of the NODE and see if the fault moves channel.
0 -
Yes the issue happens in the alternate speaker if we swap the leads round
0
Please sign in to leave a comment.
Comments
8 comments