RT100 and pulse sub

Justin

• 5. Mai 2020 14:05

I am a proud owner of the pulse sub and want to connect it wireless in the future to a powernode i2 with the RT100. However, the RT100 comes with a 3-way cable while the output of the powernode i2 is mono and the RT100 inport is mono too. Can I still use the 3-way cable and leave one connector unconnected?

And can I use this RT100 with the Pulse sub on my Marantz NR1604 receiver as well? Because it does not seem to work. 

I will try to connect the pulse mini i2 to the sub with the RT100 this evening too as that only needs USB.

0

• Offizieller Kommentar

  

  Wesley P.

  • 5. Mai 2020 15:05

  Hello Justin,

  The RT100 allows you to wirelessly connect your Bluesound player to a Bluesound Pulse Sub. This connection does not require any physical cabling aside from connecting the RT100 to the USB port of your player.

  From what you have described, you will need to connect the RT100 to the USB port of your Powernode 2i then follow the steps below to complete the pairing process.

  https://support1.bluesound.com/hc/en-us/articles/115000168948-Connecting-your-PULSE-SUB-wirelessly

  With that being said, the RT100 was designed to operate with Bluesound equipment and may not work with receivers made by other manufacturers such as your Marantz.

  Regards,
  Wesley P.
• 

  Justin

  • 5. Mai 2020 15:09

  Dear Wesley,

  I was under the impression I would need the RCA cable connected to the sub-out. Apparently usb only is enough. Thank you for your reply and I will wait untill I have received the powernode. 

  0

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.