Cover art .... too large

Beantwortet

Filea JL

• 17. Dezember 2019 05:56

Hi I am using BluOS Node2 with the BluOS App on Windows

Around 15000 files in my library.

I have modified all "folder.jpg" cover art files that were bigger than 600x600.

et some of them still do not appear saying "cover art is too large, should be less than 600x600"

I of course rebuilt the index, but the result is the same.

Even worse, some cover arts that I could see before now refuse to appear.......

Thank you for any solution that could remove this problem.

 

0

• Offizieller Kommentar

  

  Tony W.

  Product Support Manager

  • 30. Dezember 2019 15:18
  • Bearbeitet

  Hi Filea

  https://support1.bluesound.com/hc/en-us/articles/200271926

  It's also important to note the file size. In your settings, you can also select Music Library and set Optimise Artwork to ON. This will slow down your index but each album artwork will be optimised for App performance.
• 

  Dan Gravell

  • 23. Dezember 2019 11:13

  Is the maximum resolution not 1200x1200? https://support1.bluesound.com/hc/en-us/articles/200271926-Why-is-some-of-my-Album-Cover-Art-shown-as-missing-

  0
• 

  Filea JL

  • 29. Dezember 2019 17:50

  Thank you Tony.

  After re-indexing and OPtimse Artwork to on, everything seems to be OK now.

   

  1
• 

  vgorchkov

  • 27. August 2020 01:44

  Same problem. 

  However, i already reduced the cover.jpg to 130kb. Tiny picture. and i still get Artowrk too large message. Help! 

  0
• 

  vgorchkov

  • 27. August 2020 02:09

  actually tried your recommended BLISS soft. After scanning BLISS says all albums are compliant. and yet no changes - still same stupid message about artwork being too large.

  feel like doing a webex session with me and try to debug the issue as I observe? 

  0
• 

  vgorchkov

  • 27. August 2020 02:58

  ok, only after removing network share and connecting again the resized artwork is finally visible to the bluesound. all those reindexing and optimizations and art work reload options you have don't help at all. And still even after reconnecting to the share and indexing collection "from scratch" a small percentage of the art is still showing this idiotic Artwork Too Large message. I'd like to say Hi to guys who developed your software: nice job guys!

  0
• 

  Bjørn Ulvik

  Hi-Res

  • 27. August 2020 09:49

  Help - Diagnostics - Rebuild Index does the same as disconnect/connect share. Also make sure "Optimize Artwork" is "on"
  
  Regarding image size, this "powertoy" is really helpful (once configured);

  Standalone: https://www.bricelam.net/ImageResizer/
  Microsoft PowerToys https://github.com/microsoft/PowerToys/wiki/Image-Resizer-Overview
  
  
  

   

  1
• 

  Dan Gravell

  • 28. August 2020 10:02

  As per https://www.blisshq.com/music-library-management-blog/2018/02/14/maildump-bluesound/ I've had reports that deleting/reconnecting to a share does a little more than rebuild... but maybe this has changed.

  1
• 

  Tony W.

  Product Support Manager

  • 28. August 2020 13:21

  Thanks Dan

  Album Artwork that is not physically embedded in the file (such as cover.jpg or folder.jpg files) are not seen with a Reindex Music Collection scan because the music file itself did not change.

  To err on the side of caution, if you are changing album artwork, please purge the database by selecting Help, Diagnostics, Rebuild Index. Once the index completes, for safe measure, dump the local App cached artwork by Settings, Reload Album Artwork.

  0

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.