Pre-program Optical Digital Input 1 (TV mode) on remote RC1?

Answered

Jürgen Lenzing

• August 09, 2022 16:39

Is it possible to program the Optical Digital Input 1 of the Bluesound Powernode N330 under a key of the remote control RC1.
I'm asking this because turning on the Apple TV 4K doesn't automatically switch the sound to Optical Digital Input 1 because that option doesn't work with the Node N330.
This is possible with the Samsung TV, but I do not use it to switch on the TV.
I do that with the Apple TV.

 

0

• 

  Jürgen Lenzing

  • August 09, 2022 17:04
  • Edited

  Good to hear, but I've tried everything to set that option in the RC1 but I haven't succeeded so far.
  Is there a short description how I can record this?So, for example, under key number 10.

   

  0
• 

  Jürgen Lenzing

  • August 09, 2022 17:29

  Thanks again for the answer.
  I'll read it through and try again tomorrow and I hope it works.

  0
• 

  Jürgen Lenzing

  • August 10, 2022 08:28
  • Edited

  Thanks for your replies and the problem is solved, my thanks for that.
  The Optical Digital Input 1 source has been added to button 10 of the RC1 remote control after you have completed your instructions.

   

  0
• 

  Ben Vet

  • February 14, 2026 10:10

  I have the same problem, looking for a solution to program the optical digital output under presets 1-10.

  0
• 

  Seppi Evans

  Hi-Res

  • February 14, 2026 11:44

  Optical input like the OP or Output?

  0
• 

  Ben Vet

  • February 14, 2026 12:59

  Sound from my tv is optical output (from tv to soundbar). When I stream music (Spotify) I want to be able to switch back to optic input with the remote by just pressing a button.

  0
• 

  Seppi Evans

  Hi-Res

  • February 14, 2026 13:23
  • Edited

  Create a preset following these instructions, selecting the optical input as the source.

  https://support.bluos.net/hc/en-us/articles/360012637674-How-to-add-or-delete-a-Preset

  0

Please sign in to leave a comment.