Powenode N150 cant find network

Answered

Jon Hjertenstein

• June 19, 2022 20:59

Hello, My powenode has a green light but I can't find it via wifi. I have tried to reset it but it doesn't work. If I unplug it and plug it in again then it goes to red and gets stuck in that. What should I do?

0

• Official comment

  

  Mark T.

  Sr. Support Crew Member

  • June 20, 2022 12:34

  Hi Jon,

  Solid green means the player is in hotspot mode and solid red means something else.
  
  If its solid green, kindly follow the steps below but if its red please reach out to support@bluesound.com
  
  To connect your player to your wireless network, please follow the steps provide below.
   
  1) Disconnect the power from your Bluesound Player
  2) Connect an Ethernet cable directly to the Bluesound Player, which goes directly to your router
  3) Connect the power back into the Bluesound Player
  4) Wait until the LED is solid blue on the top of your Bluesound Player
  5) Open the mobile BluOS controller while connected to the WiFi network of your home
  6) Select the 3 lines in the top left corner of the BluOS app and go to Settings
  7) Select Player and then WiFi
  8) Select the WiFi network you wish to connect to and enter the password for it
  9) Wait 5 minutes and then disconnect the power from your Bluesound Player
  10) Disconnect the Ethernet cable and then reconnect the power for your Bluesound Player
  
  Thanks for #LivingHiFi

Please sign in to leave a comment.