Blusound NODE Latest Firmware Update Issue

Answered

Comments

17 comments

  • Official comment
    Mark T.
    Sr. Support Crew Member

    Hi,

    I have escalated your feedback to a support request. A member of our support crew will reach out to you soon.

  • Antonio Penim

    I have the exact same problem, after last firmware uodate

    1
  • Juho Nättinen

    There is definitely something in the latest firmware that is breaking the automatic wake-up or shutdown functionality. In my case, the device wakes up via the HDMI ARC connection, but the speakers never go into standby. The problem started after the latest firmware update.

    1
  • Morten Fckptn Hollensberg

    Confirming the same issue on my N130.

    LG TV connected.

    Auto Sense worked fine before firmware version 4.18.18.

    1
  • Dan F.

    I also have the exact same issue. Was working flawlessly before 4.18.18
    N130 connected to a Philips TV via HDMI ARC

    1
  • lortsy

    Same exact problem here. Genelec speakers on the coax out don't wake on signal when using the eARC HDMI input from the TV, even though it used to work fine.

    The only workaround right now is waking them up first with Spotify Connect and then switching back to HDMI.

    1
  • Mark Kemel

    Having the same issue. Input source HDMI ARC, output to RCA. Node 3. I hope this would be sorted out soon. 

    1
  • Plimlico24

    Me too on the N330 - but when tv is turned off - sub keeps popping and rumbling every few minutes.

    Service request raised

    I have to play some music on tidal and then off and it clears it.

    2
  • Plimlico24

    From support on my issue - they confirm its a known problem…

    Based on our testing and discussions with our Engineering team regarding your specific issue, we have successfully replicated it in our lab. Our Engineering team will investigate further and provide a fix in an upcoming firmware update.

    Unfortunately, we in technical support do not receive timelines for future development and releases, so I cannot provide a definite date for when this update will be available. Nevertheless, please be assured that our Engineering team is diligently working to resolve this issue as promptly as possible.

    1
  • Arsi

    Same problem w/ direct RCA from Node to Genelec or w/ fiber to Genelec sub. Have to open BluOS to get monitors to wake up.

    1
  • Henrik Lund

    Hope this have high priority in the development department.

    My subwoofer is set to auto off, but since the N330 never gets into standby mode the subwoofer have started to make white noice, so I have to turn the subwoofer on/off manually.

    Pretty annoying for hardware at this price.

    /Henrik

    1
  • Antonio Penim

    They broke it, but there’s no rush to fix it. Astonishing.

    1
  • Eduardo P

    Confirming the same issue on my N130.

    LG TV connected.

    Auto Sense worked fine before firmware version 4.18.18

    Seems BluOS test suite is incredibly incomplete. How about an immediate rollback of the firmware?

    0
  • Jaap Marinus

    Same issue here since latest update. Sub keeps making opping sounds after I turn tv off (HDMI Arc stays on play in the BlueOS-app)

    0
  • Fabian

    Same here. N331 does not wake up (HDMI eARC connected) when turning on my LG tv. Does not happen all the time, but maybe 4 out of 10 times. Have to click playsymbol in BluOS to wake it up manually when that happens.

    0
  • Jouni Varis

    Same issue with N132 and LG HDMI eARC with the latest firmware.

    0
  • Ville Pelt

    Could this be the same reason why Node 2i coax standby suddenly broke? My Genelec speakers now stay always on and don't enter standby power saving mode. 

    0

Please sign in to leave a comment.