Stereo configuration to HC 5.1 upgrade
Answered
Dear support,
I am about to swap my C368 amplifier to a powernode in order to enable 5.1 capabilities with flexible and discrete speaker configuration.
would I get DD/DD+ compliant configuration if I plug my current dali zensor speakers and subwoofer to the powernode N330 and get additional wireless pulse mini + pulse flex as vocal and surrond ?
Thank you for your help. If so I bring my credit card right away
-
Official comment
Hi Kevin
The POWERNODE will act as the LCR and the PULSE FLEXes will be your rear channels. The PULSE MINI is not used in a Home Theatre Group. Please see this help centre article for full details; https://support.bluos.net/hc/en-us/articles/360043743094
-
I read 4.0 / 4.1 / 4.2 in the specs for the m10 v2 which is the most sophisticated device. Does it mean there is no 5.1 configuration in any case ?
0 -
Hi Tony,
In a much broader approach, what would you advise to me in order to add rear channels using my current C368 amplifier + mdc bluOS 2i + mdc HDM-2 configuration ?
I know my amplifier runs a 3.16 BluOS version. I also know my hdmi module only supports PCM stéreo track. Does it mean there is no possibility to get the 4.1 theater group from there ?
Thanks for you help,
Kevin from France
0 -
Does it mean there is no possibility to get the 4.1 theater group from there ?
...not with the NAD C368. There is no solution to enable rear channels. You would be looking at replacing the NAD C368 with a POWERNODE N330 and then purchasing a pair of PULSE FLEX speakers and a PULSE SUB+... ...or an NAD T-Series AV Receiver such as that NAD T758v3.
...and no the NODE N130 does not support Home Theatre Grouping if you were looking at that as an option as well.
Sorry...0 -
Thank you one last thing would I get same result with any subwoofer using N330 dedicated SW output?
0 -
Yes - any wired third-party SUB-WOOFER connected directly to the POWERNODE N330 should have similar results...
0
Please sign in to leave a comment.
Comments
6 comments