NODE Wifi conection issues HELP!

Answered

Comments

7 comments

  • Anthony Proctor

    Hey Alain thanks for the reply. Here's the additional information you requested;

    1. Do you find a new ip address in the router? - Yes and  is identified by the custom device name I gave it.

    2. Can you "ping" it? If not, the cable could be defective. - Pings successfully with zero packet loss.

    3. What colour is the led on the node? - Blue when connected with an Ethernet cable.

    4. Could an update be happening? - Don’t think so. When using the iOS app and going to the Menu>Help>Upgrade option it comes back as saying ‘No Update Available’.

    5. Have you tried rebooting the router, with cable connected to node? - Potentially. Can’t quite remember.

    6. Can you see any SSID in the "configure wifi" option? - This option has been available in the past, but since switching from a short either Ethernet lead to a much longer one it seems to have stopped presenting itself. Manually inputting the SSID still works and seems to work but either option has ever lead to the NODE retaining that Wi-Fi connection after rebooting. 

    Also how do I submit a support ticket?

    0
  • Seppi Evans
    Hi-Res

    From the Bluesound App… Select Help….Send Support Request.

    Alain’s recommendation of rebooting the Router is a good starting point.

    Whilst you wait for Bluesound wire the NODE using Ethernet and install the Bluesound controller on another Ethernet wired device such as a PC / Mac and see if you can connect to the NODE. The Blue LED means it’s connected to the router which is good. The longer Ethernet cable may be bad / faulty.

    0
  • Seppi Evans
    Hi-Res

    Alain DW If you have an Ethernet cable connected when a Bluesound device is powered on the WiFi will not be enabled, therefore no diagnostics of the WiFi signal .

    0
  • paul vonk

    I have the same problem. I Think it has something to do what kind of router u use. I have a netgear Nighthawk r7000. Cant connect to the bluesound with the same problem u have. If i take my node to my brother with the same internetprovider but other router no problems at all!. the node connects in a minute!

     

    Today 1 1/2 hour on the fone with the helpdesk of NEtgear, they really did there best to help me and we had a connection with the node. But when i when out and needed a new connection the same problem again!!!! 

    0
  • paul vonk

    Ok i think i got the answere. For me it seems it hase somthing to do with the wifi security, 

     

    I chanced the security from wpa2-psk to wpa-psk/wpa2-psk in the router and it looks like its working. I can connect and is seems the connection is there to last. 

    1
  • edward

    Not sure exactly what it is....I tried changing security, channels etc but its still a no-go for 5G at any distance greater than 3ft and 2G works up to about 20ft.

    When the dust settles it should be clear that BlueSound has general wifi issues that needs to be fixed. No its not the customers router, etc. This should be obvious because 99.9% of people use multiple other wifi devices in their homes both 2G and 5G without issue. From phones, to smart TV's, computers etc...for example I have 25 devices connected to my router via wifi, some 2G some 5G and NONE of them have any issue what so ever. That is except one....

    1
  • Hara Hetta

    1 year have past and still no improvement in wifi connection and super low volume using hdmi arc.

    Im starting to think i wasted money choosing NODE rather than wiim mini

    0

Please sign in to leave a comment.