Connecting Two Pulse Flex 2i's to Projector

Answered

Julian Redding

• April 26, 2026 11:30

Hi, I would like to connect 2 x Pulse Flex 2i's to my outdoor screen projector. Having done some basic research it appears this can't be achieved using a Bluesound-based solution but rather needing to purchase an external bluetooth transmitter to plug in to the headphone jack on the projector. Am I correct in this assumption or can anyone advise or guide on the best way to achieve stereo audio or at least mono from the two speakers? Thanks, Julian

0

• Official comment

  

  Seppi Evans

  • April 26, 2026 12:24
  • Edited

  To get the picture and audio in sync you do need to use Bluesound products from the Home Theatre range.

  Using Bluetooth, coupled with the inherent delay you might find this quite unacceptable.

  If you have an Apple TV as source connected to your projector you can send the audio via airplay to the FLEX and the audio can be adjusted.

  There might be ways, perhaps another user can chime in.
• 

  Julian Redding

  • April 26, 2026 18:58

  Thanks Seppi, it might be the case I need to get a projector that supports BT 5.4 which does allow for multiple devices being connected at the same time. Hadn't considered the potential lag so might need to test/play around to see the impact. I do have an ATV so will try too. Appreciate the response.

  0

Please sign in to leave a comment.