Subwoofer integration

Answered

Tamas

• March 29, 2026 20:27

I recently calibrated my stereo using dirac live . I am connecting the node to the shiit cara preamp via analog l/r. How can i connect the subwoofer so the levels are fixed when i change the preamp volume control ? Do i set the node volume fixed and connect the sobeoofers to the node subout?

0

• Official comment

  

  Mark T.

  Sr. Support Crew Member

  • April 02, 2026 14:36

  Hi Tamas,
  
  For Dirac to correctly calibrate your room, the subwoofer must be connected to the NODE.

  For 1:1 support please feel free to reach out to our support by sending us a support request using the BluOS app or sending us an email to support@bluesound.com
• 

  Ronald Howlett

  • August 13, 2026 21:17

  So I have a SVS SB2000 Subwoofer and I have been going back and forth between the sub-out on the Bluesound Node and my Yamaha RN2000A which has a sub-out.  While it is nice to use the sub-out on the NODE the volume on the SVS sub can only go up two or three notches, then,  BAM it really starts "booming" .  It is not the same intervals when I use the Yamaha sub-out, which i can go up very evenly in turning of the volume output.   Really don't understand why this happens.  Can anyone explain why this might be the case.  It is really nice being able to use the Bluesound Node crossover adjustments but at the expense of not having gradual volume adjustments to my subwoofer volume.   Any ideas out there?

  0

Please sign in to leave a comment.