Power noe 2 plus turntable

Answered

Comments

5 comments

  • Official comment
    Tony W.
    Product Support Manager

    Hi Larry

    Congrats on your new POWERNODE. The POWERNODE does not have a phone stage - if your turntable does not include a line out or you are using a vintage turntable, you will need an outboard phone preamp. We here at Bluesound are big fans of the NAD PP2e or the NAD PP4. 

  • Larry Leatherwood

    Thanks Tony. I would prefer keeping the preamp internal to the turntable like this:

    https://www.project-audio.com/en/product/essential-iii-recordmaster/

    This should work but would appreciate a confirmation plus need to know what cable I need to connect this to the POWERNODE?

    0
  • Larry Leatherwood

    This turntable has phono stage.

     

    https://www.project-audio.com/en/product/debut-carbon-recordmaster-hires/

     

     

    0
  • Tony W.
    Product Support Manager

    That will work too - I can't see the back panel so I assume it is RCA out - so RCA to 3.5mm - keep it under 1M if you can since it is phono - no more than 2M (the exact opposite of social distancing guidelines). Also, check the Project documentation about grounding.  

    0
  • Larry Leatherwood

    Thanks, Tony - I did read about the grounding issues and being an IT Pro by trade, I used to have a true ground that was literally stuck into the dirt out in my back yard. 

    You've been very helpful. 

    0

Please sign in to leave a comment.