Disable WiFi

Answered

David Gruber

• April 17, 2019 20:40
• Edited

Hi there,

I wired my house, so I don't have any use for WiFi. I realy wanna disable it on my Powernode 2i. Didn't find any setting for that. It existed in former firmwares. Any way to get it back?

Thanks a lot

David

1

• Official comment

  

  Tony W.

  Product Support Manager

  • April 18, 2019 12:44
  • Edited

  Hi David

  If you are using the wired ports, wi-fi is disabled automatically disabled.
• 

  giovanni sada

  • March 04, 2020 06:22

  Hi Tony, I have the same request and I can confirm that once wi-fi has been turned on and the Powernode uses a wireless connection it stays like that even with when wired.

  0
• 

  Wesley P.

  • March 04, 2020 16:59

  Hello Giovanni,
  
  As Tony has mentioned, the Powernode will automatically disable its wireless communications once an Ethernet cable is connected. If the Powernode was previously connected to WiFi and the Ethernet cable is disconnected, the Powernode will automatically revert to WiFi to reconnect to the network.

  Regards,
  Wesley P.

  0
• 

  Peter Meter

  • February 13, 2021 04:02

  It seems that "When you connect a wired cable, the WiFi Module is disabled automatically." is true, but only when you actually plug in a wired cable. When the cable is already connected and the wired internet starts working, the unit doesn't recognise that and stays on WIFI. No problem, but something you should know. So plug out the cable and plug it back in, to disable WIFI.

  0
• 

  Gordon Delgado

  • April 03, 2022 22:50

  So plug out the cable and plug it back in, to disable WIFI

  And every time you reboot...pretty poor!

  0
• 

  Christopher Witt

  • October 03, 2023 17:29

  Hi,I really need the information for a new installation of powernode, powernode edge and 3 Pulse flex 2i. I need to disable WLAN because all devices are connected with LAN wire. Are you sure, the WLAN doesn't send any frequency anymore? I have a customer who is really sensitive of the WLAN signals ... thank you for a prompt l answer....

  0
• 

  Andrew Bobinskas

  • November 22, 2023 12:45

  I have bluesound nodes connected to ethernet, and my computer connected to ethernet. They are on the same network. I cannot select music using the Bluos app unless the wifi in the house is on. Why is this the case if ethernet disables wifi?

   

   

  0
• 

  Tony W.

  Product Support Manager

  • November 22, 2023 12:49

  Your router is blocking traffic - check your router multicast settings or documentation to understand why it is not allowing IoT traffic on your home network in a wired setup. If problems persist - you can select Help, Send Support Request in the App and in the description field tell our Support Crew the make and model of your router.

  0

Post is closed for comments.