Very low volume on analog input

When I connect my headphone output from my laptop dockingstation into the N130 analog input. The volume is very low compared to Tune-in or Tidal.. Volume way over 60% is a hearable volume.

Also tried it with an USB-C DAC->3,5mm jack connected at my dockingstation and plugged into the Node. Same result

(The N130 is connected with an optical cable to a set of KEF LSX Active speakers.)

When I plug the cable directly into the KEF LSX, the volume is as it should be.

Also tried the same scenarios described above on a Node X -> same result.

Additional information:
Also used my Samsung S23 Ultra with the USB-C- DAC and connect it to the analog input of both Nodes, Also very low volume.

What can I do to make the volume from the analog input the same as the outher sources?