Node - HDMI ARC doesn't work
AnsweredHi,
I purchased Bluesound Node yesterday and when I connect my TV through HDMI/ARC, it doesn't work.
My vinyl works through Analog In, AirPlay works, but my TV doesn't.
Can you please advise?
Thanks,
Yosri
-
Official comment
You may need to turn on the HDMI ARC port on the TV in its settings (my TV says HT output) also ensure that the audio format is set to 2 Ch PCM.
Do also double check that you are using the ARC / eARC port on the TV
-
The TV (Sony XR75X90J) was connected to a Sonos Beam speaker from the same ARC port which used to work fine. Now, as I changed the Sonos Beam by Bluesound Node, I just don't have any sound. All settings are the same. I tried different HDMI cables. Still nothing. The Node also shows up and is enabled when I go to the Bravia Sync device list.
Can you please advise?0 -
Change the audio out format as above.
0 -
You are right, I had to dig deeper in the TV settings to find it. But now it's working, thank you Seppi.
1 -
I will try to do your suggestion, thank you Seppi!
1
Please sign in to leave a comment.
Comments
5 comments