SOLID RED LED AFTER UPDATE BLUOS 4.0 PULSE FLEX 2I
Answered
Hi,
I have 2 Pulse flex 2i's one has updated fine but one is stuck, I have tried rebooting many times now, on power on the light goes solid red then green for a second and then solid red permanently, if I hold down the power button after the green it will flash red for 5 seconds, then solid green for 5 seconds and then back to solid red, I have tried plugging in the ethernet cable but it is not talking to the router, has the update bricked my speaker or is there any other tricks to try?
-
Official comment
Hi Mark
We have resolved this issue in the PULSE FLEX not booting properly after a software update... via software update.
We appreciate this is not easy and with the button press you described, you may have also factory reset it so please try this using the Ethernet connection. Keep unplugging and plugging the FLEX back in every 5 minutes or so until you notice it finally flash red and green. If it does not work, after three tries, try reversing the power polarity by unplugging the power cable from the back of the FLEX and reverse it (rotate it 180 degrees). Try 5 more times...
If you still can't get it, then e-mail support@bluesound.com and we can provide some other tips and trick to try and jump-start it again. -
Same issue for me. Pulse Flex solid red after update. Cannot connect to LAN. Tried endless power ups, never gets past solid red light immediately after connecting AC power
0 -
HI Brett
I believe I saw you on another thread... Our Support Crew will be in touch via e-mail.
0 -
I think I hit the same issue. I have a node 2 and it's now solid red for 45 minutes or so. I'll leave it like this for a bit, but I think the upgrade won't work.
0
Please sign in to leave a comment.
Comments
4 comments