Extreme software enhancement this year possible?

Answered

Michael

• September 30, 2023 13:11

Hi

Does anyone know if the software BluOS Controller will be revised in the medium term and thereby significantly improved?
Not only in the area of user guidance but rather connectivity, stable connection within groups, etc.

I am currently testing the following setup


LG-TV (TV sound) to BlueSound

LG-TV > Optical to Flex 2i (stereo pair)
Works with slight variations

LG-TV > Optical to Node 2i -> to Flex2i (stereo pair)
Works with slight fluctuations

LG-TV- > Optical to Node 2i -> to Flex2i - Stereo Pair - Front + Flex2i - Stereo Pair - Rear
Works, but is unbearable. Front and Rear are swapped again and again for a short time.
Delay front to rear up to approx. 2 seconds
Sound fluctuations within the stereo pairs as well.

All setups also in mono - > No change, so same catastrophic result.

Yes, I have tried all imaginable settings already, AV, AutoSense and what ever there is.
2, 5 hours tried. Nothing goes even remotely satisfactory.

Thanks

0

• 

  Michael

  • October 01, 2023 06:40

  Thanks for the info!
  So I have not written a word about an HT Group!
  
  In my example, a sound signal goes from the TV Optical Out to Optical IN on the NODE 2i. The NODE should bring the signal to the 4 Flex 2i. The speakers should not have a different timing (latency) at the output.
  My setup again:
  I can add 2 x stereo groups to the NODE.
  I can add a MultiGroud to the NODE,
  I can set everything to mono... but it doesn't matter what I set. It does not work as expected.
  And even if I use only ONE stereo pair, there are sound problems.
  
  Oh yes, the network.
  The network seems curious always the problem first. All the devices have a LAN connection. And that's how they are connected in my network.
  
  Thanks
  
  

  0
• 

  Michael

  • October 01, 2023 08:15

  Thanks

   

  0

Please sign in to leave a comment.