Bluesound Vault 2 Flashing Green Light

Answered

Dan Woomer

• August 14, 2023 19:46

Hi all,

I have read the other posts to clear up the flashing green light, however, my vault is wired to my ethernet.  So it is not likely a wifi setting causing the problem.  I've tried unplugging the power and rebooting.  Same problem.  My guess is an upgrade failed.  Is there a way to upgrade my Vault 2 (SN: K78V2B10960) manually to the current software/firmware version?

Thanks

0

• Official comment

  

  Seppi Evans

  Hi-Res

  • August 14, 2023 20:26
  • Edited

  Power off your Router, any switches and the Vault. Give it five mins and turn the Router (and any switches) back on and again wait five mins. Whilst waiting unplug and re plug the Ethernet lead at both the Vault and whatever it’s plugged into. Now turn on the Vault and see if that helps.

  If not check the Routers lights to see if a connection (link) is being made.

  There have been no firmware updates since May for your Vault.

  The flashing green LED means it’s not connect to the network (that includes Ethernet on the Vault)

Please sign in to leave a comment.