Powernode 2 Subwoofer Output
After upgrading the firmware, there is no output to a subwoofer when the option is toggled on and off in the audio settings. All systems have restarted a few times just to make sure.
-
Ah… just replied to your other post, presume you can see your devices now?
0 -
Only from a desktop, not from the few ios Devices we use. All wifi has been reset and with leases. All networking equipment rebooted.
0 -
Hi try to connect Powenode 2 subwoofer output via an RCA cable to my Yamaha RX-V800 amplifier CD inputs (only one channel Red) looks no inputsignal what can be the problem? Do i need to activate subwoofer in the application?
0 -
You connect the Powernode’s subwoofer output to your Subwoofer and not the Yamaha amplifier.
0 -
Thanks why?
0 -
Because the amplifier is not a subwoofer.
Edit.. and as an AV amplifier it will add a processing delay, if you used a stereo direct mode then the subwoofer output on the amplifier would be disabled.
1 -
Thanks but if i connect the Subwoofer output of the Powernode 2 directly to one CD input of my amplifier should i not hear a sound? Or should i understand the Pwernode will automatic isable its output?
0 -
You will have to check the settings on your amplifier, this is not a supported connection method by Bluesound or Yamaha.
0
Please sign in to leave a comment.
Comments
8 comments