Low volume output from Sub+ while connected via wireless

Answered

Comments

6 comments

  • Official comment
    Tony W.
    Product Support Manager

    Hi Port

    Please select Help, Send Support Request in the BluOS App so we may review the system log files from both the SUB and SOUNDBAR. Our Support Crew will review and let you know what they see.

  • Port

    Thanks Tony, I just did.

    0
  • Port

    Following advice from the support crew, I performed a factory reset on the Sub+ and was able to choose the "use without pairing option" via an analog cable. The question of why the option under Settings -> Audio -> Subwoofer -> Subwoofer, the (Analog Connection) disappears after a while was left unanswered, but I'm happy with the workaround, I'm able to squeeze higher output using the analog cable, the Sub+ now sounds more authoritative.

    1
  • Panagiotes Karanikas

    I was having the same issue with very low volume from my pulse sub+ connected wirelessly to my Soundbar 2i. I spoke to support and they fixed it immediately. Open up the Audio Settings for your soundbar and adjust the volume range from "-90 - 0" to "-45-0." This will engage the sub amplifier for some reason. Instantly the sub started kicking. Tweak the bass to 5 or 6. Increase the subwoofer trim to 10. I also adjusted the crossover to 100hz. The sub sounds awesome now.

    0
  • Stefan Mehre

    Hi,

    thanks for sharing. But this is not a real solution. This means the soundbar can‘t get to lower volumes anymore. For me the lowest is too loud with these settings.

    This gets even more difficult if you use the Soundbar with other players in groups, for the kitchen for example. The soundbar volume slider at 1 and for the others 20/30. 

     

    We really want the subwoofer trim range the PowerNode got back after some discussions. -10 to +10 is not enough, not shure at the moment what the PowerNode has at the moment but it’s a bigger range.

     

    0
  • Panagiotes Karanikas

    Until BluSound fixes the Soundbar audio settings software, the above is the only workaround. The alternative is a $750 brick.

    0

Please sign in to leave a comment.