How to BluOS2 reconnect to a new wifi

Answered

Tomas Povilaika

• January 10, 2023 12:11

I moved to a new location and cannot reconnect the device nether to App no to new wifi. App is not finding any player anymore.

0

• Official comment

  

  Tony W.

  Product Support Manager

  • January 10, 2023 14:20

  HI Tomas

  From www.bluesound.com/setup; 

  Wireless Setup over Ethernet 

  When you install a new router or if the other methods listed above do not work – perform the following steps to configure the Player to the required wireless network.

  1. Disconnect the power cord of the Player from the power outlet.
  2. Connect an Ethernet cable directly from the router to the Ethernet port of the Player.
  3. Connect the power cord of the Player to the power outlet.
  4. Wait until the Status Indicator LED of the Players turns solid Blue.
  5. Connect the Android/iOS or Windows/macOS device to the required WiFi network and launch the BluOS Controller App.
  6. Select the Navigation Drawer (3 lines in the upper left corner of the App).
  7. Select Settings > Player > WiFi.
  8. Select the required WiFi Network from the Configure Wireless drop-down menu.
     Note: If the required WiFi Network does not appear or is hidden, select Manual SSID Entry. Enter the Wireless SSID and select the Protection type the network uses.
  9. Enter the WiFi network's Password.
  10. Select Update.
  11. Wait for 5 minutes and disconnect the power cord of the Player from the power outlet.
  12. Disconnect the Ethernet cable of the Player and connect the power cord of the Player to the power outlet.
• 

  Tomas Povilaika

  • January 10, 2023 16:06

  Thank you. Connecting to the router directly helped to solve the issue.

  1
• 

  Donald Murray

  • October 26, 2024 00:40

  Really??? I have six players. I have to do this procedure 6 times? I didn’t have to do any of this when I set up the system

  0

Please sign in to leave a comment.