Pulse 2 low volume from digital/analog in?

Answered
Miro

A question to the community - do you experience a very large difference in volume level when switching from streaming (e.g. Spotify connect) to analog or digital in? In my case, the difference is almost tenfold (10% volume for music, needs to jump to 70 or even 100% for TV+AppleTV 4gen, PS3, 3.5mm from iPhone or Macbook). Changing settings on any of the devices doesn't seem to affect it, and the simplest case of iPhone with a stereo cable has the same effect (did it just as a control).

Thanx!

0

Comments

4 comments

Date Votes
  • Official comment
    Brandon C.

    Hi Miro,

    Volume levels will depend on the source as such volume levels will differ from source to source.

    You can setup Presets to have a specified Volume for certain inputs and even Playlists, more information can be found here : 

    https://support.bluesound.com/hc/en-us/articles/209333728-How-Can-I-Set-a-Preset-in-Bluesound- 

  • Eivind

    I am also struggling with this on my Powernode 2i.

    0
  • Chris Lucas

    I'm struggling with this on my new Powernode. The volume of any inputs (a turntable in my case, but also confirmed with running my iphone via a jack) seem to be an order of magnitude lower than the internal streaming. This is really frustrating, as I have to nearly run the amp at full volume in order to hear my turntable, but then risk flipping back to internal streaming and blowing my head off.

    0
  • Stefan Mehre

    I am seeing this too and I am wondering if there could be a input volume gain to adjust such situations. I saw such settings in many other systems.

    If not possible by software for the 2i and newer devices maybe put this into newer devices, because this would really help.

    0

Please sign in to leave a comment.

Didn't find what you were looking for?

New post