Use NODE as an audio interface

Answered

Comments

4 comments

  • Official comment

    Hi Martin

    Two simple ways you can already do that (as I do with a Powernode in my office...)

    1) Pair your computer's Bluetooth with the Player and select Bluetooth as your computer speaker...

    2) Run an analog cable from your computer headphone jack to the Analog In port on the back of the Player...

    Comment actions Permalink
  • Avatar
    Martin Mietke

    Hi Tony,

    Thanks for your reply.

    Good idea, but I've an Node w/o Bluetooth.

    The cable solution is not a solution, as I can connect my computer direct to my amp with a cable.

    regards Martin

    0
    Comment actions Permalink
  • Hi Martin

    My apologies - for a Gen1 Node (with no input) pick up an ioGear GBU 512 Bluetooth adapter. If your Authorised Bluesound Dealer is out, you can usually find them on line for under $15 US. Plug this into the USB port on the back of the Gen 1 Node and option 1) should work fine.

    0
    Comment actions Permalink
  • Avatar
    Martin Mietke

    Hi Tony,

    that was a great hint.
    In germany is it a bit dificult to get the iogear BT dongle.
    So I deceided to use an other one with the same chipset Broadcom BCM20702
    That dongle works fine as well.

    Cheers Martin

    1
    Comment actions Permalink

Please sign in to leave a comment.