Whole House Setup
Beantwortet
Hi
Building a new home and looking at installing a whole house audio system.
I only recently discovered Bluesound and have a few questions.
My setup:
Living/Dining/Kitchen (large single room with 18" cathedral ceiling):
Pre-wired for 4 speakers and should always play on all 4
TV (should be played over the speakers)
Master bed:
Pre-wired for 2 speakers
TV (should be played over the speakers)
Master bath:
Pre-wired Single stereo speaker
Outdoor:
Pre-wired for 2 speakers
Media:
Full 5.1.2 setup to be used as a source
Would also like to stream from a Bluesound device into those speakers
What I believe I would need:
1x Powernode (living/dining/kitchen)
3x Powernode edge (outdoor/master bath/master bed)
1 x hub (media as a source)
1 x node (stream to media)
Did I get it right?
Would I be able to stream any TV to any rooms? ie living TV to outdoor or master TV to master bath?
Could I stream a CD (connected to media AVR to the entire house)?
Do I need an additional powernode edge or powernode for the extra speakers in living/dining/kitchen? (even if I always want them at the same volume and to play the samething)? or should I do a node and a 4 channels amp?
If I stream Tidal with the powernode in living and also connect the outdooor powernode edge, what would be the resolution outdoor? 24bits or 32bits? (24 bits is my guess)
Thanks in advance, I know it's a lot of questions in one place.
-
Offizieller Kommentar
Hi Mario
The short answer is Yes this is all possible. Please check out a Bluesound Authorised Reseller near you to check out the details for each room in your home. You also don't have to do it all at once... BluOS grows as you grow...
To locate a dealer near you, please see; https://www.bluesound.com/stores/
-
Be aware that you cannot have multiple groups though. E.g. If you want to stream to room1+room2 now, you will need to create this group. If you then later need to stream to room1+room3 (or something different than room1+room2), you will have to delete the group completely and create an new one.
0
Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.
Kommentare
2 Kommentare