How do I switch from Wired to Wireless on my NODE
Beantwortet
I am having trouble switching my NODE from wired to wireless. I've done the regular set up several times with no luck. Now the NODE will only work with the ethernet cable attached. Is there something else I need to do?
Thanks!
-
Offizieller Kommentar
Hi Mark
All Setup questions are answered here; https://support.bluos.net/hc/en-us/articles/360000057968
-
No kidding. Read my post. You guys continue to amaze me.
0 -
Wireless Setup over Ethernet: If you have installed a new router in your home or if the other methods listed above do not allow you to connect to your network, please follow the steps below to configure your player to your wireless network.
- Disconnect the power from your Player
- Connect an Ethernet cable to the back Ethernet port of your Player and the other end directly to your router
- Reconnect power to the back of your Player
- Wait until the LED on your Player returns to solid blue
- Ensure your smartphone, tablet or computer is connected to your home WiFi network and open the BluOS app
- Select the 3 lines in the top left corner of the BluOS app and go to Settings > Player > WiFi
- From the list of available networks, select your home WiFi and enter your WiFi password
- Wait 5 minutes and then disconnect the power from your Bluesound Player
- Disconnect the Ethernet cable and then reconnect the power for your Bluesound Player
Have more questions? Submit a Request
0 -
Oy!
0 -
I am trying to do this with my Vault2. When I go to settings>player, I do not get a wireless option.
Can you help me?
0 -
There is no Wi-Fi in your Vault.
0 -
Yeah, I just figured that out :-)
I’m usually smarter than this - hahaha0
Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.
Kommentare
7 Kommentare