Stereo configuration to HC 5.1 upgrade

Beantwortet
Kevin

Dear support,

I am about to swap my C368 amplifier to a powernode in order to enable 5.1 capabilities with flexible and discrete speaker configuration.

would I get DD/DD+ compliant configuration if I plug my current dali zensor speakers and subwoofer to the powernode N330 and get additional wireless pulse mini + pulse flex as vocal and surrond ?

Thank you for your help. If so I bring my credit card right away 

0

Kommentare

6 Kommentare

Datum Stimmen
  • Offizieller Kommentar
    Tony W.
    Product Support Manager

    Hi Kevin

    The POWERNODE will act as the LCR and the PULSE FLEXes will be your rear channels. The PULSE MINI is not used in a Home Theatre Group. Please see this help centre article for full details; https://support.bluos.net/hc/en-us/articles/360043743094

  • Kevin

    I read 4.0 / 4.1 / 4.2 in the specs for the m10 v2 which is the most sophisticated device. Does it mean there is no 5.1 configuration in any case ?

    0
  • Kevin

    Hi Tony,

    In a much broader approach, what would you advise to me in order to add rear channels using my current C368 amplifier + mdc bluOS 2i + mdc HDM-2 configuration ?

    I know my amplifier runs a 3.16 BluOS version. I also know my hdmi module only supports PCM stéreo track. Does it mean there is no possibility to get the 4.1 theater group from there ?

     

    Thanks for you help,

    Kevin from France

    0
  • Tony W.
    Product Support Manager
    • Bearbeitet

    Does it mean there is no possibility to get the 4.1 theater group from there ?

    ...not with the NAD C368. There is no solution to enable rear channels. You would be looking at replacing the NAD C368 with a POWERNODE N330 and then purchasing a pair of PULSE FLEX speakers and a PULSE SUB+...   ...or an NAD T-Series AV Receiver such as that NAD T758v3.

    ...and no the NODE N130 does not support Home Theatre Grouping if you were looking at that as an option as well.

    Sorry...

    0
  • Kevin

    Thank you one last thing would I get same result with any subwoofer using N330 dedicated SW output?

    0
  • Tony W.
    Product Support Manager

    Yes - any wired third-party SUB-WOOFER connected directly to the POWERNODE N330 should have similar results...

    0

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.

Sie haben nicht gefunden, wonach Sie suchten?

Neuer Post