M10 HDMI ARC not working anymore

Beantwortet
Fabian E

Hi!

If I start up the TV the M10 does not wake up via HDMI ARC.

If I manually wake up (tap) the M10, it is still connected to HDMI ARC but does not play any sound.

If I reconnect the HMDI Cable it works again, but often times its out of sync or has some crackling going on.

I had 0 problems with that before the last patch. I tried another cable, rebooting, etc.

Happy to send logs or open a remote session.

p.s.: huge props to fixing the display issues (at least for me)!!

 

1

Kommentare

7 Kommentare

Datum Stimmen
  • Offizieller Kommentar
    Sam R.

    Could be that your TV did a background update and changed something. That being said, would be good to check everything on the BluOS side just to confirm - replicate the issues and then send the logs via Help > Send Support Request (logs automatically attached)

  • KriHad
    Lossless

    Hdmi arc still works here, M10 <> LG C7.

    0
  • Fabian E

    Hi Sam R.,

    so i got two updates:

    1. Most of the times, pulling and plugging the HDMI cable fixed the issue. The issue came back every evening after trying to wake up the M10 from Standby (timed-out hdmi arc connection i guess). Spotify was responsive and playing as expected - switching back to HDMI no sound again.

    2. Yesterday and today the M10 did not respond at all when tryin to wake up. No connection in the App, no response on the screen and no response on the button on the back. I had to pull the power plug. After that (reboot) everything back to normal. I will try if this persists with optical instead of HDMI...but this is new.

    I sent the logs (and linked this thread) after hard reset because of issue 2, but as far as i can tell it doesn't show in the logs.

    BluOs Version 3.14.26

    0
  • Hansell Pasco

    I’m having the same problem with my M10 V2. I’ve always had this problem. Using modern, Brand name 2.1+ ultra HDMI cable connected to eARC on a brand new sony.  Only way to resolve is same solutions posted by Fabian

    1
  • Fabian E

    I ultimately switched to optical...and I recommend you do the same if possible. Its a bummer and I still can't tell if its the NAD or my TV that causes the problem. But I rather don't use the tv volume control than restart the device every few days...

    0
  • Hansell Pasco

    Thanks for the tip.  I’ll try optical.

    0
  • BluOSfan

    I am feeding sound directly from the new Apple TV so optical is not an option. Is NAD or Bluesound actively troubleshooting this issue?

    0

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.

Sie haben nicht gefunden, wonach Sie suchten?

Neuer Post