Headphone with 250 ohms impedance and node 2i

Beantwortet

Jerome

• 29. November 2020 19:16

Hi,

can the node 2i drive a headphone with 250 ohms impedance and nominal sound pressure level of 102 dB (1 mW / 500 Hz) ?

Regards,

Jerome

0

• Offizieller Kommentar

  

  Sam R.

  • 30. November 2020 15:56

  Hello Jerome, 

  The NODE 2i feature a dedicated headphone output driver rated 0.0055% THD @1kHz, 35mW. It is designed for use with most headphones with a minimum impedance of 14 ohms.

  I believe in the past I've seen this headphone driver capable of driving headphones rated at 150 ohms.

  That being said, I would strongly recommend testing beforehand, as choosing a pair of headphones to use with the NODE 2i depends on a number of factors including impedance, headphone sensitivity and the listener's general loudness preference. You'll want to make sure the NODE can power your headphones to your preferences before settling on a pair. 

  Regards,
  Sam R.
• 

  Jerome

  • 1. Dezember 2020 07:03

  Hi Sam,

  thanks for your answer.

  Searching the internet, I've read that the headphone amp in the node 2 (not 2i) is a TI TPA6130A2, is it the same in the node 2i ?

   

  I'll definitely find a local reseller where I can test headphones before buying one.

   

  Regards,

  Jerome

  0
• 

  Sam R.

  • 1. Dezember 2020 20:56

  Headphone amp between the NODE 2 and 2i would be the same, yes

  0

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.