Equalizer

Beantwortet

robot

• 4. Mai 2020 14:35

Six years ago there was the first post about equalization.of the sound. Nothing happened in the meantime. Why?

 

2

• Offizieller Kommentar

  

  Tony W.

  Product Support Manager

  • 4. Mai 2020 17:19

  Hi Robot

  Thanks for contacting Bluesound. In April of 2015 we introduced basic Tone Controls into BluOS. Here's how; https://support1.bluesound.com/hc/en-us/articles/204636618
  
  If you are looking for a more comprehensive solution, I would suggest looking at some BluOS Enabled Products by NAD such as the NAD M10 or NAD C658 which include DIRAC Room Correction Software.
• 

  Jerry

  • 4. September 2020 06:31

  this is not sufficient. two tone controls that drops the volume by 6db is a dreadful implementation!

   

  please put forward a proper 8 band EQ that does not drop volume - look at what spotify has done and replicate

   

  thanks

  Jerry

   

  5
• 

  Jo Verhoef

  • 18. September 2020 12:20

  I totally agree with Robot and Jerry!

  1
• 

  Gary Bennett

  • 5. Oktober 2020 05:52

  A Pi/HifiBerry Digi+ Pro with Moode Audio into NAD C368 Coax beats the BluOS MDC module simply because of the ability to leverage the alsa equalizer. Come round to my place if you don't believe me. Adding an equalizer to BluOS can't be that hard, can it?

  1
• 

  Daniele

  • 27. Oktober 2020 20:19

  addition of at least 2 bands could greatly help the usability of this splendid player.
  Just having the lows and highs is really restrictive on a wonderful player like the node 2i is

   

  2
• 

  Vladimir

  • 31. Oktober 2020 07:47

  Hi!
  In 2017, I was one of the first to buy a NAD M32 with Bluos MDC Module2. When playing music from streaming services such as Tidal, Qobuz, etc. The low LF level comes from the module. The equalizer in NAD M32 does not correct the situation. The level of low frequencies is very low and they are not enough. I also have Bluesound Pulse 2, which has tone controls in the Bluos app. Why are there no such controls in the Bluos module for NAD devices??? Can you update the software for the module and add tone controls to the module app???

  0
• 

  Vladimir

  • 31. Oktober 2020 07:53

  Can it be possible to upgrade programmatically to + 3-6 db LF level for my module if it is not possible to make tone controls in the application ???
  Thanks!

  0
• 

  Sam R.

  • 2. November 2020 15:16

  Hello Vladimir, 

  On the remote for your M32, I believe you can press the TONE button (Also labeled as the the STOP button) and then use the up/down/left/right button to go down two items to bass and then use left and right to increase or lower it.

  Regards,
  Sam R.

  0
• 

  Viliam Majer

  • 21. Dezember 2021 22:55

  hello i also have over m33 ku and also it struck me that my phone Samsung Galaxy s20 ultra players a couple poweramp castle in question much better and through dynaudio evoke 30 extract much fuller sound there is a chance that this will still be correct add there a proper broadband equalizer thank you very much

  0
• 

  Viliam Majer

  • 21. Dezember 2021 23:08

  htrm 2 remote control.

  how do I please activate the buttons on this controller that are colored brown brown?

  0
• 

  Tony W.

  Product Support Manager

  • 22. Dezember 2021 13:34

  Viliam - your issues may best be handled by our good friends down the hall at support@nadelectronics.com 

  0
• 

  JG.B.

  • 21. November 2022 20:28

  Hi all,

  As mentioned on other posts, more/better EQ options would be highly (highly) appreciated by the vast majority of Bluesound users who have selected Bluesound gears for the Hi-fi/Better than Sonos approach.

  Hoping it should be doable at a relatively limited cost and will be considered at some point

  3

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.