Standby Node 2i with Remote RC1?

Beantwortet

Sebastian Stoss

• 1. April 2020 18:07

Hello,

 

I know there is no pissibility to force the Node 2i into sleep mode. I can hold the play/pause button on the device for longer than 15 seconds in order to put it in a sort of standby, but can I do this with the red button on the remote RC1?

Do you know? Many thanks.

0

• Offizieller Kommentar

  

  Tony W.

  Product Support Manager

  • 1. April 2020 18:33

  Hi Sebastian

  The NODE and other Bluesound Players are designed to be always on and always ready. They will go into Stand By on their own when idle for >15 minutes consuming less than 3W as required by EU Green initiatives.

  Placing the player in VACATION MODE of pressing and holding it for 5 seconds powers down the player into a 0.5W stand by if you will be away for extended periods but is not designed as an ON/OFF switch. It will reboot from the start when you do this and can take up to 5 minutes to connect to network devices. You are also prematurely ageing the power supply when doing this. You cannot do this using a remote because the IR sensors are also powered down in this state.

  Just set it and forget it.

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.