Digital Output Via Optical Out
Beantwortet
I have seen some discussion on this but my experience is proving to be a bit different. I am using a Toslink cable from My Vault 2i to a Chord Mojo DAC. Whenever I try to play a 192/24 file I get cracking and popping. If I turn off fixed volume in the audio settings, the file will play fine, but this means I have no volume control remotely. DSD files play at 192/24 regardless of settings so I guess my questions are: do I have to sacrifice remote volume control to enable 192/24 playback and does the Vault 2i pass a DSD file though natively or is there PCM conversion at work? Thanks!
-
Offizieller Kommentar
HI Jim
We do not play DSD files until they are converted to PCM in the BluOS App for Windows or MacOS; https://support.bluos.net/hc/en-us/articles/360019447014
That being said if ALL 24/192 causes distortion, i would try changing your optical cable grade. What grade... depends on the DAC on the other end.
Or try using the on board Burr Brown 24/192 DAC on the VAULT 2i itself by going analogue out direct to your amplifier, your ears may be surprised...
-
Hi Tony,
The Toslink cable is an Audioquest Carbon so I am doubting that is the issue. Also, as I mentioned, the 192/24 files have no distortion at all when the volume setting is changed to fixed so something is going on there. Also, if I play the files direct from my NUC via USB there is no distortion.
I have been listening to the Vault via the analogue outs for almost a year so I am quite familiar with the sound which is, as you said, quite good. I was just listening for differences and couldn't figure out the quirky behavior. Thanks for clearing up the DSD mystery.
1
Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.
Kommentare
2 Kommentare