Cannot get factory reset to work

Leonie clark

• 20. Dezember 2024 03:59

I have moved and am trying to setup my vault2 to a new network . I attempted a factory reset. I don’t see the blue initial light going to red. It goes straight to red . When I hold down the play button it goes from red flashing greens there is no flashing red in the process

0

• Offizieller Kommentar

  

  Seppi Evans

  Hi-Res

  • 20. Dezember 2024 10:24
  • Bearbeitet

  No need to factory reset as all you need to do is physically plug in the Ethernet lead and the network will be discovered upon powering on. The LED at the front will turn Blue and you will see the connection in your Routers web interface.

  Saying that you are probably experiencing configuration issues in your new Router / network. Check your router settings to ensure Multicast (mDNS) traffic is allowed. Also see if there is a setting that says IGMP Snooping or IGM Proxy... turn it on. You could try a wired (Ethernet device such as a PC / Mac with the BluOS App installed, if this work it points to the Router blocking Wi-Fi to LAN connections.

  If you continue to have issues the BluOS App please select Settings, Send Support Request, so the Bluesound Support Crew can review the log file and take a closer look. If you cannot do this then use email support@bluesound.com

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.