Bluesound Node output modes

Georgi Zhelyazkov

• 26. Dezember 2023 23:01

Hello,

I have a question about NODE's output modes. 

If I connect 2 outputs in the same time:

#1  The Analog Stereo RCA output TO integrated Amplifier and

#2 The TOSLINK digital optical TO Powered speakers

Can I switch (with app or remote) between those 2 modes? In both cases I would like to stream music via "Tidal Connect" with my Android phone into the NODE.

So, will I be able to select to which output the music to be sent? Output #1 will be sent to Amp + passive speakers and #2 output will be send to powered speakers.

Thanks

 

0

• Offizieller Kommentar

  

  Bjørn Ulvik

  Hi-Res

  • 26. Dezember 2023 23:49

  There is no setting to enable/disable output, they are all "live", except if you enable USB output. That will disable any other output.
• 

  Georgi Zhelyazkov

  • 27. Dezember 2023 22:59

  Thanks for the comment. So I understand that if I want to listen to one of the outputs (RCA or Optical) I just have to Switch OFF the other one, e.g.. the Amplifier or the Powered speakers.

  One more thing, can you confirm that the NODE supports Tidal Connect? But Not via the BlueOS app, so I can just directly stream from my Android Phone via the Tidal Android App.

  Thanks

  0
• 

  Tony W.

  Product Support Manager

  • 3. Januar 2024 13:11

  Yes BluOS Supports TIDAL Connect; https://support.bluos.net/hc/en-us/articles/19454479226391

  0
• 

  Georgi Zhelyazkov

  • 3. Januar 2024 21:11

  Hi, thanks for the confirmation.

  0
• 

  Rays Jazz

  • 9. Januar 2024 13:35

  You can have both connected at the same time, I did that into my DAC, then just changed the input on the DAC to compare the sound, RCA was better than optical on my system.

  0

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.