Bluesound Node 2i - Sub output extremely loud.
Beantwortet
Hi,
I have recently purchased a Node 2i. It sounds amazing however I'm having issues with the sub out. I have to turn the gain down on my sub to virtually zero otherwise it's way too loud. I also have the sub plugged into my AV amp and the level is perfect. When my amp is selected to direct stereo it does not output to the sub so I was hoping I could from the Node 2i.
Any ideas?
Many Thanks,
Adrian.
-
Offizieller Kommentar
This is the first time I've heard that the NODE's sub is too loud. Do you perhaps have the NODE set to Fixed Output? If so, just like the other outputs, the subw out will output max volume and volume adjustment will need to be done from your subwoofer.
Regards,
Sam R. -
This is also my finding. Bass is too loud. Not just on subwoofer but also on stereo speakers.
BlueSound node 2i was connected to external Onkyo amplifier with analog connection.
Onkyo amplifier had connected to subwoofer and stereo speakers which were playing too loud bass. .
I had to turn following setting on subwoofer to have to in normal level and acceptable for listening - crossover on subwoofer to 60Hz and gain to 20%. On node i have fixed output checked and no other setting on amplifier (all on neutral levels)
This bass exploded recently when i found out i made mistake in setting at Node 2i.
I found that subwoofer checkbox (in Audio setting) is referring to subwoofer connected to node 2i, not to subwoofer connected to amplifier.
So when i disabled checkbox, whole bass was forwarded to amplifier and it became too strong.
0 -
I'm having the same issue and luck fixing it Adrian?
Thomas
0 -
I've experienced the same with both the N2 and the N130. I use an analog crossover (Outlaw Audio ICBM-1) to address this. The ICBM-1 is a leftover from my home theater days and has come in quite handy over the years, even for 2-channel.
0
Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.
Kommentare
4 Kommentare