Can't see the Analog input

Beantwortet

Cesar B.

• 5. Februar 2021 01:22

I connected my CD (no digital output) using RCA (left and right) to 3.5mm cable into the Bluesound Node 2i. In the BluOS I couldn't see the Analog input, only Digital input. How can I listen to my CD's ? Thanks

0

• Offizieller Kommentar

  

  Sam R.

  • 5. Februar 2021 15:06

  Hello Cesar, 

  The Analog Input and Digital Input port on the NODE is the same port. Do you already have a digital player connected to your NODE -- if so, into which port are you connecting this CD player?

  Regards,
  Sam R.
• 

  Cesar B.

  • 5. Februar 2021 19:15

  Hi Sam,

  Yes I know the A/D input is the same port. I connected my CD player, which only has RCA outputs, using the provided RCA to 8.5mm cable provided by Bluesound. So I connected the RCA to the CD and the 8.5mm to the A/D input on the NODE. I turned on the CD and played a song. Then I opened the BluOS, clicked on the three lines and there's no "Analog Input", only "Optical Input", anyway I clicked on it and no sound as expected. Then I clicked again three lines, -> Settings -> Player -> Customize Sources -> Analog Input and make sure the "Hide source" was disable, and yes it was. 

  0
• 

  Sam R.

  • 5. Februar 2021 20:50

  Interesting. If its saying "Optical" instead of "Analog", then the hardware is detecting an Optical TOSLink (there's a slight difference in the how the TOSLink adapter and 3.5mm jacks are shaped, which is what is used to detect Optical or Analog).

  A good test here is to connect a pair of earphones to the Analog/Optical Input port of the NODE -- it won't play anything, but it will detect the 3.5mm and should show Analog Input in the BluOS app. If it reports correctly, it may simply be a bad cable that came with the player. 

  0
• 

  Cesar B.

  • 7. Februar 2021 18:24

  Hi Sam,

  Great idea. I connected my earphones and the Analog Input appeared on the app, then I connected again the CD and yeah there it was the Analog Input! Thanks for the practical solution!

  1
• 

  Olav Vennemann

  • 17. Juni 2022 16:02
  • Bearbeitet

  I have the same issue with my node 2i. I can’t see any option to change input source for the node in my app. I tried the headphones trick as mentioned by Sam without change.
  In fact if I go into settings and change the name for analog input, it won’t get saved either.
  Any suggestions are welcome. (Tried the obvious or reboot etc)

  for info - node os: 3.18.7

  0
• 

  Joost de Zeeuw

  • 29. Mai 2024 17:50

  I've got the same problem after an update for my Bluos App, input Analog was gone in my app...

  I've a Bluesound Node N330, I've tried everything, but none of it works... Does somebody maybe has an answer what to do? 

  0
• 

  Mark T.

  Sr. Support Crew Member

  • 29. Mai 2024 18:56

  Hi Joost, 
  
  I've escalated your feedback to a support request. A member of our support crew will reach out to you soon.

  0
• 

  Andrew Downie

  • 31. Mai 2024 13:51

  Hi 

  I have the same problem since update today.

   

  0

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.